#1997 f150 stereo upgrade kit install
#1997 f150 stereo upgrade kit driver
#1997 f150 stereo upgrade kit full
#1997 f150 stereo upgrade kit android

I would recommend deadening between the outer facing panel of the door and the panel in which the speaker is mounted too.

Drill two holes on either side of the panel and place the panel to the side.

Place the sound panel onto the door where it would be positioned.

Here's the steps I took to deaden the doors and prep them for speaker mounting:

#1997 f150 stereo upgrade kit full

And if you want the full panel covered and are willing to pay the ~20% markup for the templates I would absolutely recommend these. That said, I've heard a lot of great things about SoundSkins precut dampening kit. It also saved me a ton of time doing it this way. I would say I went with about a 65%-75% approach which, in my opinion, I'll see probably 85%-95% of the deadening benefits. Mainly because of the aftermarket sound panels that provided a ton of rigidity to the door, and naturally deadened it as well. When I deadened the doors, I chose not to do a comprehensive covering of the inner panel.

#1997 f150 stereo upgrade kit driver

I was able to neatly zip tie the bundle and secure it above the driver's feet under the dash and then along the driver kick panel out of sight.Īll of the RCA and speaker output wires were then ran along the channel between the floor board and the door frame where they fit very nicely.

I also ran the remote wire to the amps, and an additional wire for the AXDSPX's subwoofer control knob to the steering column. This was one of the most challenging parts of the wiring because there were so many thick wires. This required a total of 7 speaker wires to be ran up and through the dash along with two separate sets of RCAs (4-ch and 2-ch). Starting with the center dash, I ran all of the required wires up and through to the center dash below the factory midrange speaker.

#1997 f150 stereo upgrade kit install

The first thing I set out to do with the truck was get all of the groundwork wiring ran so that I could install the amplifier racks. One thing worth noting in this diagram, however, is that the amplified FL, FR, RL, RR signals from the amps in the rear were wired back to the dash behind the head unit, where I tapped back into the factory wire harness via the Axxess AXDSP-X's included T-Harness. If you haven't already read these articles, I recommend doing so! They are what set the context to this article.Ĭheck out all related articles to this F-150 Custom Stereoĭiagram/mapping of all of the components I planned on installing, where and where I planned to wire them All of this work has already been completed prior to this article. This included wiring prep, building the amplifier rack, cutting and building the subwoofer enclosure and more. In part 2, I walked through all of the preparation I did before heading down to the truck to install all of the components.

You can find a list of all of the parts that I used throughout this build on my 2021 F-150 Stereo Buildsheet. In part 1, I detailed out all of the various decisions and research I did in order to decide on the products and ultimately purchase everything that I needed to make this installation happen.

In part 1 and 2 of this multi-series stereo install, I went through the details of planning out my system and preparing all of the components for installation.

Tuning with the AudioControl SA-4100i RCA Mic & Axxess AXDSPX.

Setting Gains with SMD DD-1 Distortion Detector.

Setting the Factory EQ Flat via FORScan.

These Class FD bridgeable four-channel amps offer 400 watts max power or 45 Watts of power per channel, and a compact design-so much so that there are all kinds of new possibilities for mounting locations in your truck. Believe it or not, those two little boxes to the right of the head unit are a pair of the GM-D1004 amps. Basically, this unit packs just about everything into it at a reasonable price. Outputs include video output with six-channel preamp outputs. Inputs include front A/V, rear A/V and USB inputs, and rear-view camera input.

#1997 f150 stereo upgrade kit android

Features including a 6.1-inch touchscreen, a DVD/CD player with 50 x 4 watts peak power, compatibility with iPod/iPhone/Bluetooth, playback and control through USB of music files on compatible Android devices, MIXTRAX, which is a DJ-like audio/visual feature, and a remote control. For the head unit we chose the Pioneer AVH-X3600BHS 2-DIN DVD/iPod/iPhone/Bluetooth/SiriusXM, AppRadio Mode and MirrorLink. Upon arrival at OC Autostyle in Anaheim, Califonia, we consulted with the experts and settled on the Pioneer products we'd be installing in our audio-challenged '97 F-150.